Part Number Hot Search : 
K2320 BJ17C BYD33 TLMH3101 BT222 20KW160 PSMN1R 1EVKI
Product Description
Full Text Search
 

To Download NLP250 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Embedded Power for Business-Critical Continuity
NLP250 Series
Single output
RoHS
Rev.09.10.07 NLP250 Series 1 of 4
Total Power: 250W Input Voltage: 85 - 264VAC # of Outputs: Single
Special Features
* Active PFC and EN61000-3-2 compliant * 250 W on main channel with forced air * Low profile fits 1U applications * U-Channel for maximum thermal performance * Optional cover (CJ suffix) * 5 V standby output * 12 V fan output * Integrated ORing diode * Active current sharing * Integrated control and monitoring features * Overcurrent, overvoltage and overtemperature protection * Compliance to EN55022-B conducted noise standard * RoHS compliant * 2 year warranty
Electrical Specifications
Input
Input voltage range Input frequency range Input surge current Input current Input fuse 264 Vac (cold start) 120 Vac @ 250 W 230 Vac @ 250 W UL/IEC127 200 LFM fored air 250 LFM with cover Main output Auxiliary outputs @ 120 Vac Input Main output 50-100% step at 0.5 A/s Main output Cyclic operation Singles 5 Vsb 12 V (fan) Safety ground leakage current 264 Vac, 50 Hz Universal input 85-264 Vac 47-63 Hz 40 A max. 1 mA 2.78 A rms 1.36 A rms T6.3 AH, 250 Vac 250 watts 2.0% 5.0% 2.0 s max. 5.0% or 250 mV max. dev., 1 ms max. recovery to 1% 0.02%/C 115%, 5% Continuous 0A 5 V @ 1.0 A 12 V @ 0.3 A
Output
Maximum power Total regulation (line and load) Turn-on delay Transient response
Safety
VDE0805/EN60950-1 IEC950/IEC60950-1 File No. 1040100-3336-0210 UL/cUL 60950-1 CSA-C22.2 60950-1 File No. E135734 Certificate No. 40014041 CB Ref DE1-32468
Temperature coefficient Overvoltage protection Short circuit protection Minimum output current Auxiliary outputs (See Note 8)
All specifications are typical at nominal input, full load at 25C unless otherwise stated
Embedded Power for Business-Critical Continuity
EMC Characteristics (5)
Conducted emissions ESD air ESD contact Radiated immunity Fast transients Surge Conducted immunity EN55022, FCC part 15 EN61000-4-2 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Level B Compliant Level 3 Level 3 Level 3 Level 3 Level 3 Level 3 Harmonic current correction EN61000-3-2
Rev.09.10.07 NLP250 Series 2 of 4
General Specifications
Hold-up time Efficiency Isolation voltage 85 Vac @ 60 Hz 115 Vac @ 250 W 230 Vac @ 250 W Input/output Input/chassis 20 ms @ 250 W 84% typ. 86% typ. 3000 Vac 1500 Vac
Safety approvals (see note 6) UL/cUL UL60950-1, VDE EN60950-1 CAN/CSA22.2 No. 60950-1 Weight MTBF (@25 C) 650g (22oz) Telcordia SR-332 MIL-HDBK-217F 317,000 hours min. 158,000 hours min.
Environmental Specifications
Thermal performance Operating ambient, (See derating curve) Non-operating 0 C to 50 C ambient, 200 LFM forced air 250 LFM with cover 0 C to 50 C ambient, 0 C to 40 C with cover convection cooled 50 C to 70 C ambient, convection cooled Relative humidity Altitude Vibration (See Note 7) Shock Non-condensing Operating Non-operating 5-500 Hz per MIL-STD-810E Derate linearly to 50% load 5-95% RH 10,000 feet max. 30,000 feet max. 2.4 G rms peak 516.4 Part IV 175 W -40 C to +85 C 250 W 0 C to +70 C
Embedded Power for Business-Critical Continuity
Ordering Information
Output Voltage 12 V 24 V 48 V Notes
1 2 3 Free air convection. Maximum continuous output power not to exceed 175 W. Refer to Figure 1 for the derating curve. 200 LFM (250 LFM with cover) forced air cooling from the longer side. Maximum continuous output power not to exceed 250 W. Figure is peak-to-peak for room temperature rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted pair, terminated with a 10 F tantalum capacitor and a 0.1 F ceramic capacitor. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. For optimum reliability no part of the heatsink should exceed 115 C and no semi-conductor case temperature should exceed 120 C.
Output Current Min 0A 0A 0A Max (free air) (1,4) 14.6 A 7.3 A 3.65 A Max (forced air) (2,4) 21 A 10.5 A 5.25 A
Rev.09.10.07 NLP250 Series 3 of 4
Ripple (3) 120 mV 240 mV 480 mV
Total Regulation 2.0% 2.0% 2.0%
Model Numbers (9,10) NLP250R-96S12J NLP250R-96S24J NLP250R-96S48J
5
4
No external filtering required during conducted emissions testing but some applications may require additional filtering to achieve system compliance. Compliance with radiated EMI specifications may require mounting in a suitable enclosure. 6 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 7 Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G 8 5 V sb (standby) output is available whenever AC is present, regardless of remote ON/OFF signal status. 12 V (fan) present when main output is present. 9 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. "CJ" suffix indicates covered RoHS version. 10 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
Figure 2: Mechanical Drawing
CUSTOMER MOUNTING HOLES MAX. SCREW PENETRATION 0.08IN 6-32
4.000 [101.60]
J1 E L N
1 J3
JP1 VR7 J4 J2
1
0.750 (19.05)
M3.0 5.850 (148.59)
1 0.25 (6.35)
6.250 (158.75) M3.0 4 PLACES
7.000 [177.80]
6-32 4 PLACES
4.700 (119.38) 1.500 [38.10] 5.500 (139.70) BOTTOM VIEW
2.500 (63.50)
Embedded Power for Business-Critical Continuity
Figure 1: Derating Curve Output Power (Watts) DERATING CURVE Output Power (Watts)
All Models Forced Air 250 W 200 LFM (1.0 m/s) FORCED AIR COOLING 175 W 24/48 V Free Air
Figure 1b: Derating Curve With Cover Output Power (Watts) DERATING CURVE Output Power (Watts)
WITH COVER
All Models Forced Air
Rev.09.10.07 NLP250 Series 4 of 4
Americas
24/48 V Free Air
250 W 250 LFM (1.25 m/s) FORCED AIR COOLING 175 W
12 V Free Air
12 V Free Air 125 W NATURAL FREE AIR CONVECTION COOLING 75 W
125 W NATURAL FREE AIR CONVECTION COOLING 87 W 75 W
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
0W 0C 10 C 20 C 30 C 40 C 50 C 60 C 70 C
0W 0C 10 C 20 C 30 C 40 C 50 C 60 C 70 C
Connector and Mating Connector Types Connector
J1
Type
Molex 09-65-2058 (5273 series)void pins 2 and 4 or equivalent Molex 22-23-2021 (6373 series) or equivalent Molex terminal block 387007504 or equivalent Molex 22-23-2091 (6373 series) or equivalent
Mating Connector Type
Molex 09-52-4054 (5239 series) or equivalent with Molex 08-52-0072 (2478 series) or equivalent crimp terminals Molex 22-01-3027 (2695 series) or equivalent with Molex 08-50-01113 (2759 series) or equivalent crimp terminals Terminal block contains #6-32 screw with clamp washer suitable for wire size 12-22 awg (0.5-2.5 mm2). Max Torque tp 1.36 Nm (12 in.lb) Molex 22-01-3097 (2695 series) or equivalent with Molex 08-50-0113 (2759 series) or equivalent crimp terminals
Asia (HK)
16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
J2
J3
For global contact, visit:
www.powerconversion.com technicalsupport@powerconversion.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
J4
J1 PIN CONNECTIONS Pin 1 Ground/Earth Pin 2 Live Pin 3 Neutral
Pin 1 Pin 2
+12 V SGND
J2 PIN CONNECTIONS Fan Voltage Return
Pin 1 Pin 2 Pin 3 Pin 4
J3 PIN CONNECTIONS Vo +Main Output Vo +Main Output RTN Main Return RTN Main Return J4 PIN CONNECTIONS +S +Vo Remote Sense -S -Vo Remote Sense LS Load Share Signal PS OFF Remote ON/OFF signal NO PS ON Remote ON/OFF signal NC SGND Signal Common PW OK Power Good 5 Vsb Stand-by Voltage DC OK DC Power Good Signal
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.
Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9


▲Up To Search▲   

 
Price & Availability of NLP250

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X